EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Demand Controller can be a extremely successful photo voltaic controller made for off-grid photo voltaic systems. Based upon multiphase synchronous rectification engineering, it makes certain optimized Power conversion and program steadiness for a wide range of photovoltaic (PV) programs.
Key Capabilities in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technologies for outstanding solar Electricity harvesting. Key options involve:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
State-of-the-art MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for Improved battery lifetime.
Liquid crystal display Display with serious-time facts monitoring.
Several Load Management Modes including guide and timer.
In depth Digital Protections versus overcharging, around-discharging, short circuits, and reverse polarity.
Stage-by-Stage Information to Organising the EPEVER Tracer AN Sequence Controller
one. Unboxing and Making ready the Controller
Make certain all factors are included: Tracer AN unit, temperature sensor, communication cables, and user guide.
Confirm the model selection and voltage scores match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a perfectly-ventilated, dry place close to the battery financial institution.
Safe the Tracer AN controller using the supplied mounting brackets.
Sustain suitable clearance for warmth dissipation.
three. Wiring the Photo voltaic Cost Controller
Warning: Generally comply with suitable safety protocols and make sure the system is run off prior to connecting factors.
Action 1: Connect the battery terminals to the demand controller (beneficial to constructive, damaging to negative).
Move two: Join the solar panel array into the PV input terminals.
Move three: Hook up the load terminals if employing a immediate load link.
Stage 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Electrical power within the controller by connecting the battery very first.
Make use of the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light-weight Management.
five. Monitoring and Details Logging
The Tracer AN Collection supports authentic-time monitoring utilizing the MT50 remote meter.
Data is usually logged through the RS485 communication port applying application including Photo voltaic Station Personal computer.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Energy Output
Examine battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Change method parameters if needed.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technologies makes certain:
Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Reliability: Steady general performance visit here below variable masses.
Longer Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is really an exceptional choice for optimizing solar power technology and extending battery existence. By next the above setup tutorial, customers can guarantee most efficiency and technique longevity.