EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Cost Controller is really a really efficient photo voltaic controller designed for off-grid photo voltaic programs. Dependant on multiphase synchronous rectification technologies, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Demand Controller technologies for exceptional solar Power harvesting. Important functions contain:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with serious-time details checking.
Various Load Command Modes including manual and timer.
Extensive Electronic Protections towards overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the model selection and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Often comply with appropriate safety protocols and make sure the process is driven off just before connecting factors.
Stage 1: Join the battery terminals into the charge controller (positive to positive, detrimental to destructive).
Action two: Hook up the solar panel array to the PV input terminals.
Stage three: Hook visit here up the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Facts may be logged by using the RS485 conversation port employing computer software such as Photo voltaic Station Computer.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation 1: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense
Verify the photo voltaic array’s voltage ranking.
Alter procedure parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Bigger Effectiveness: Minimized Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is surely an Fantastic choice for optimizing solar power era and increasing battery lifestyle. By adhering to the above setup tutorial, users can make certain utmost performance and program longevity.